Selected publications and research projects.
Publications 40 / 40
International Journal of Heat and Mass Transfer, 256, 127921
How can heat-transfer physics predict penetration depth and weld width when heat input changes over time and the plate has finite boundaries?
焊接学报 / Transactions of the China Welding Institution（2026-09-14 网络首发）
How can stereo images with reflections, weak texture and similar edges be converted into usable pre-weld robot paths?
Journal of Manufacturing Processes, 174, 404–419
Is the current frontside weld-pool image determined only by instantaneous penetration, or does it also depend on the preceding welding history?
Journal of Manufacturing Processes, 157:27–42
How can graded stainless-steel/nickel-alloy deposits achieve a better combination of microstructure, strength and ductility?
Robotics and Computer-Integrated Manufacturing 95, 103022
How can multiple partial scans of an intersecting-pipe joint be combined into a continuous welding path with suitable torch orientations?
Journal of Manufacturing Processes, 141, 1578–1594
How can multiple pass trajectories and locally appropriate welding speeds be generated together for a saddle-shaped groove?
Mechanical Systems and Signal Processing 224, 112056
How can multimodal process signals reveal defects during robotic welding of excavator booms?
Journal of Manufacturing Processes, 133:260–270
How can process observations support fast temperature-field estimates when full-field measurement is difficult and finite-element simulation is slow?
Journal of Manufacturing Processes, 138, 203–213
How can welding states such as penetration, burn-through and misalignment be recognized when new labeled examples are scarce?
Measurement, 242, 116096
How can welding-state monitoring retain the benefits of an ensemble without running several large networks online?
Journal of Manufacturing Processes, 141, 517–535
How can changing pool contours be segmented and categorized as welding pass and torch posture vary in multi-layer MAG welding?
Materials Science and Engineering A, 921, 147607
Can ultrasonic assistance and heat-input adjustment jointly improve microstructure and mechanical properties while suppressing cracking in laser-deposited Inconel 738?
Welding in the World, 69:1207–1218
How do melt-pool geometry, temperature and sidewall strain affect the stability of laser-deposited thin walls?
Welding in the World, 69:1385–1399
How can measured geometry guide multilayer, multipass welding of a saddle-shaped header-to-nozzle joint?
IEEE Transactions on Industrial Electronics 71 (1), 1037–1048
Journal of Manufacturing Processes, 121, 233–245
How can a saddle-shaped header-to-tube groove with varying cross-sections be filled in multiple passes without teaching every point?
Tribology International, 195, 109574
How can the surface left by belt grinding be linked to subsequent hardening burnishing to predict final roughness in Inconel 718?
Journal of Manufacturing Processes, 120, 15–27
Can ordered, smooth tool-contact paths be generated from scanned point-cloud regions without first reconstructing a complete CAD surface?
Additive Manufacturing, 83:104060
How does melt-pool overflow change layer height during multilayer laser deposition, and how can it support prediction?
Mechanical Systems and Signal Processing, 220:111632
How can worn honeycomb structures be removed from distorted turbine seals without excessive damage to the reusable substrate?
Advanced Engineering Informatics, 61:102465
How can measured point clouds directly produce practical grinding paths for weld beads on curved surfaces?
IEEE Transactions on Industrial Informatics 19 (9), 9565–9575
Journal of Manufacturing Processes, 108:889–902
How can the back-side pool be observed inside a pipe to recognize penetration during all-position TIG welding?
Measurement, 214, 112821
How should image-analysis methods be matched to low contrast, interference and subtle defects in welding radiography?
Journal of Manufacturing Processes, 87, 150–159
How can visually similar laser-welding states be distinguished from subtle differences in molten-pool and keyhole images?
Optics & Laser Technology, 164:109510
Can offline planning reduce corner bulging in laser deposition while predicting the resulting layer height?
金属学报 / Acta Metallurgica Sinica, 58(4):541–550
How can sensing, knowledge-based decisions and process control be integrated for complex, changing welding conditions?
Surface & Coatings Technology, 436:128292
Can polishing improve a belt-ground surface without removing most of its strengthened layer?
Journal of Manufacturing Processes, 75:767–791
Which optical signatures can be observed during laser welding, and how can they be connected to defects and weld quality?
Journal of Manufacturing Processes, 74:1–13
Can arc sound and electrical parameters jointly identify insufficient shielding gas and weld leakage in CMT lap welding?
Journal of Manufacturing Processes, 64, 1296–1306
How is grinding energy distributed among the workpiece, belt, chips and surroundings, and how does heat accumulate in abrasive grains?
Journal of Manufacturing Processes, 68, 1–12
Why does material removal change with belt wear even under constant normal force, and can single-grain mechanics explain it?
Materials & Design, 197, 109214
Can interlayer material design reduce cracking during directed energy deposition of crack-sensitive Inconel 738?
Journal of Materials Processing Technology, 294, 117112
How do thermal softening and elastic belt contact change the balance of rubbing, ploughing and cutting and the resulting heat flow?
Journal of Manufacturing Processes, 68:209–224
Can changing pool images, sound and electrical signals predict an abnormal welding state before it develops?
Materials Science & Engineering A, 824:141822
Can layer-by-layer laser-power adjustment mitigate heat accumulation and improve the Laves-phase morphology of deposited Inconel 718 thin walls?
Journal of Manufacturing Processes, 57, 575–588
How can heat entering a ground workpiece be tracked as belt wear and contact force change?
Journal of Materials Processing Technology, 260, 9–19
Can grinding sound estimate the remaining cutting capability of a worn belt without stopping it for inspection?
电焊机 / Electric Welding Machine, 43(4):8–15
Which sensing and control capabilities are needed to move robotic welding beyond teaching and playback?
